Anova Core™ · 先進石材系統 Anova Core™ · Advanced Stone Systems
讓沉重的巨石，
化為輕盈、透光、
可隨心塑形的當代空間。
Liberating monolithic stone into a supple,
luminous, and freely formable
contemporary architectural surface.
0.7 kg
面材最輕
重量
Min. Weight
R200 mm
最小彎曲
半徑
Min. Radius
B1
防火耐燃
等級
Fire Rating
30 yr+
戶外耐候
年限
Weathering
章節 2 · 問題共鳴 Section 2 · The Design Dilemma
在高端旅宿、商業品牌場域與豪宅立面裡，真正痛苦的從來不是缺少材料，而是每一種材料都逼迫團隊對真實性、曲率、重量、光、或提審能力做出某種退讓。
In premium hospitality, branded commercial interiors, and luxury residential facades, the real pain is never a lack of material options — it is that every option demands the team surrender something: authenticity, curvature, weight, light, or specification authority.
曲面邏輯Load Constraint
剛性石板破壞半徑；印刷板材又失去礦物說服力。這就是柔性結構系統存在的原因。 Massive quarried stone imposes severe vertical load restrictions, creating immense structural engineering bottlenecks for high-rise and curtain wall approvals.
光的邏輯Spatial Efficiency
LumiSlate™ 要解決的，不只是能夠發光，而是石材如何在真實礦脈中維持勻光、耐候與場域權威。 Traditional thick cladding assemblies and backup framing layout penalties silently consume high-value interior net floor area.
結構邏輯Planar Rigidity
同樣 10㎡，Anova Core™ 先進石材系統約 15kg；傳統天然厚石板約 300kg。95% 死重差距，直接改變專案條件。 Rigid quarry minerals break under tension, forcing expensive, fragmented segmentation when mapping onto fluid organic forms or column wrapping.
提審邏輯Luminous Engineering
對高端專案來說，沒有技術證據庫，就沒有真正的材料信任。這就是我們把 B2B 文件庫提到前半段的理由。 Conventional thick slabs exhibit uneven mineral density and hot-spotting, making uniform, macro-scale backlighting technically high-risk.
章節 3 · 四大工程系統 Section 3 · The Engineering Framework
系統 01System 01
天然石材面層 + 羊毛氈背襯，將真石紋理帶進圓柱、曲面牆、接待台圓角與自由半徑包覆。 Millimetric optimization breaks past stone dead-load boundaries, unlocking advanced high-altitude specs and lightweight interior partitioning.
系統 02System 02
天然石材面層結合透光背襯，為精品吧台、飯店櫃台與發光牆面提供真實礦物紋理與可控光域。 Form-yielding flexibility maps directly to fluid geometric matrixes, allowing authentic geological faces to wrap continuously around radiuses.
系統 03System 03
專攻大板巨幅書頁對紋（Book-match）連續視覺，以更低死重與更高現場容錯完成豪宅主牆與大廳焦點。 Homogeneous light propagation through real mineral crystals, achieving flawless, high-fidelity diffusion for monumental architectural backlighting.
系統 04System 04
將天然砂岩（Sandstone）與真石肌理全面併入 Exterior Façade 立面系統，對齊日本結構膠 30 年以上海島耐候主動防線。 Standardized layout matrices and systematic detailing drastically expedite architectural submittals and streamline on-site installer workflows.
LUMISLATE™ 透光光影真相 LUMISLATE™ · THE TRANSLUCENCY TRUTH
以 2mm 的極致真石結晶複合表皮，轉譯固態質量的厚重語調。在背光亮起瞬間，天然礦脈轉化為溫潤琥珀般的奢華光域；在回歸靜默時，依然宣告真石材無可撼動的誠實威信。
觸動指尖左右擦拭，親手感受同一片天然真石表面，如何在 3000K 暖光發光效果 (Effect On) 與 自然不透光狀態 (Effect Off) 之間，進行光影質感的瞬間切換。
A 2 mm crystalline stone composite veneer — reinterpreting the gravitas of solid mass. When backlit, natural mineral veining transforms into a warm amber luminous field; in stillness, it asserts the unimpeachable authority of genuine stone.
Drag left and right to experience how the same natural stone crystalline face seamlessly transitions between Effect On (3000K Warm Glow) and Effect Off (Its Intrinsic Silence) — rewriting the spatial atmosphere in an instant.
3000K · 暖意款待光Warm Hospitality Glow
3000K 的溫暖光線穿透石材結晶，為奢華大廳、私人俱樂部與臥房帶來溫馨典雅的空間氛圍。
3000K warm light shines through the stone crystals, bringing a cozy and elegant atmosphere to luxury lobbies, private clubs, and bedrooms.
4000K · 平衡建築光Balanced Architectural Light
4000K 自然光完美平衡石材紋理與空間溫度，最適合頂級展廳與現代豪宅。
4000K natural light perfectly balances the stone texture with space temperature, ideal for premium showrooms and modern luxury homes.
6000K · 冷光藝廊照明Cool Gallery Illumination
6000K 冷光激活石材內部結晶結構，為公共藝術空間與科技總部帶來銳利、前衛的未來感。
6000K cool light activates the internal crystal structures, giving a sharp, futuristic look to public art spaces and tech headquarters.
章節 5 · 效益對比 Section 5 · The Performance Case
在保證 100% 天然真石結晶美學的同時，以 3D 幾何立體摺面與柔性曲面包覆能力，徹底解放傳統石板的平面限制。我們為專案省去 95% 結構死重、創造 5 倍現場施工效率。在安諾的誠實材質威信前，市場常見的印刷仿材與人造底板皆無可比擬。
Anova Core™ systematically operates on a rigorous three-tier architectural delivery logic: calculated mass reduction, structural predictability, and systematic installation logic. It shifts heavy, fragmented on-site stone masonry into a highly controlled, dry-joint specification standard.
流動柔性美學 ── Anova 先進系統的 3D 立體幾何與真石光影律動 Fluid Materiality — Anova Advanced System's 3D Geometric Articulation and Natural Stone Light Dynamics
10㎡ 結構死重Dead Load per 10㎡
釋放 95% 結構死重，輕量化 secondary framing 友善，大幅降低工程風險。 Ultra-lightweight design. Reduces total stone weight by up to 95% compared to traditional thick stone cladding.
現場施工速度Installation Speed
木工主導高效裝配節奏，無需重型泥作工班，5 倍效率壓縮工期與人力成本。 Carpenter-led dry assembly, no heavy mortar crews needed. 5× faster installation radically compresses project schedules and labor costs.
最小曲面半徑Minimum Curve Radius
包覆曲面柱體、接待台圓角與複雜空間半徑，傳統厚板爆邊風險極高。 Wraps columns, curved counters, and complex radii with zero fracture risk. Traditional thick slabs simply cannot bend.
透光系統能力Translucency Capability
LumiSlate™ 實現發光牆、柱、接待台，3000K–6000K 氛圍自由切換。 LumiSlate™ creates glowing walls, columns, and reception counters with ambient atmosphere freely switchable from 3000K to 6000K.
倒角斷面品質Cut Edge Quality
系統性消除倒角黑邊痛點，徹底清除廉價斷面破口對高端空間的破壞。 Systematically eliminates exposed dark cross-sections at cut corners, removing the telltale flaw of lower-grade materials from premium interiors.
防火等級Fire Rating
全系列統一 B1 難燃定位，適合高層建築、飯店大廳與公共空間提審規格。 Passed international fire safety tests. Features excellent self-extinguishing properties to meet strict commercial project standards.
真實礦物面層Stone Surface Layer
零重複網點感，每片天然礦脈紋路獨一無二，真實材質威信無法被複製。 Zero repeated dot patterns. Every mineral vein is entirely unique — authentic material authority that no imitation can replicate.
耐候壽命Weather Resistance
無機礦物基底，海島型氣候全天候零聚合物老化、黃變、鼓包與翹邊風險。 UV-resistant, acid-proof, and anti-fading. Stands strong on extreme outdoor facades and in high-humidity luxury bathrooms.
| 評估項目Criteria |
Anova Core™
ArchiNova
先進真石材Advanced Real Stone |
石紋裝飾美耐板 (如 K＊科＊ / 富＊家) Stone-Print HPL Laminate |
高分子軟磁 / 軟瓷類 Polymer Soft Stone / Flexible Ceramic |
大規格岩板 Large-Format Sintered Stone | 傳統仿石磁磚 Traditional Stone-Look Tile |
|---|---|---|---|---|---|
| 面層真實性Surface Authenticity |
100% 天然真石結晶，獨一無二礦脈紋理。 100% natural stone crystal surface — unique, unrepeatable mineral grain. |
人造樹脂或聚合物基底，具重覆印刷網點感。 Synthetic resin or polymer base with visible repeating print patterns. | 人造樹脂混合泥土，大面積易看出人工感。 Synthetic resin-clay composite — artificial appearance apparent at scale. | 人造高溫燒結瓷質，大面積數位噴墨仍偏呆板。 High-fired sintered ceramic — digital inkjet printing appears flat and repetitive at large scale. | 人造數位噴墨磁磚，版數有限、具重覆呆板感。 Digital inkjet tile — limited pattern variations result in repetitive, uniform appearance. |
| 拼縫與黑邊Cut Edges & Seams |
系統化消除黑邊斷面，倒角收口極致緻密。 Systematically eliminates dark cut edges — chamfered terminations are seamless and precise. |
邊緣斷面膠感明顯，木作拼縫極易產生黑邊。 Visible adhesive on cut edges; carpentry joints frequently expose dark seam lines. | 邊緣橡膠感明顯，失去高端建築真石材氣質。 Rubber-like edge texture undermines the premium stone character of the space. | 剛性邊緣硬接，現場二次加工極易脆裂、45度倒角造價昂貴。 Rigid edges prone to chipping during site fabrication; 45° chamfer finishing is costly. | 塊體尺寸受限，現場留有多道磁磚拼縫、破壞大氣和諧感。 Size constraints leave multiple visible grout lines, disrupting spatial coherence. |
| 曲面自由度Curved Surface Freedom |
R200mm 自由包覆，圓柱與有機曲面輕鬆服貼。 Free wrapping at R200mm — columns and organic curved surfaces conform effortlessly. |
可微彎，但厚度不一、高風險脆裂。 Minor flex possible, but uneven thickness creates high cracking risk. | 可彎曲，但塑料橡膠感底材導致整體視覺質感低落。 Bendable, but plastic-rubber base substrate degrades overall material quality. | 剛性無法彎曲，異形曲面需精密雷射切割碎拼、造價高昂。 Completely rigid — curved surfaces require precision laser-cut mosaic assembly at high cost. | 剛性完全無法彎曲，弧形牆面只能硬切碎拼。 Fully rigid — curved walls can only be achieved through hard-cut fragmentation. |
| 核心耐候防線Weather Resistance |
30年+ 無機耐候，抗UV、零聚合物老化黃變。 30+ years inorganic weather resistance — UV-stable, zero polymer yellowing. |
限室內使用，膠合層照光極易老化脫膠。 Indoor use only — adhesive bonding layer degrades rapidly under UV exposure. | 戶外環境下 2–3年快速老化，易產生鼓包翹邊脫落風險。 Rapid outdoor degradation within 2–3 years — blistering, edge lifting, and delamination risks. | 耐候佳，但死重巨大、外牆懸掛結構與鐵件預算極昂貴。 Good weather resistance, but extreme dead load demands costly external steel hanging structures. | 耐候佳，但自重巨大且易有磁磚空鼓、掉落安全風險。 Good weather resistance, but heavy self-weight creates tile debonding and fall safety risks. |
| 現場施工效率Installation Efficiency |
木工化高效裝配（30 ㎡/天），工期壓縮 80%。 Carpenter-led dry assembly (30 ㎡/day) — project schedule compressed by up to 80%. |
木工黏貼快裝，但屬低端飾面語境、難進高端專案。 Fast carpenter adhesion, but perceived as a low-end finish — difficult to position in premium projects. | 快裝，臣服於塑料耐用度瓶頸，無法支撐長期物業價值。 Fast to install, but plastic durability ceiling undermines long-term property value. | 需動用重型吸盤設備與特製高黏背膠，現場加工損耗極大、工班費用高。 Requires heavy suction equipment and specialist adhesive — high site waste and labor costs. | 泥作重型工班（6 ㎡/天），重型濕作業、基底打底施工慢。 Heavy wet-trade crew required (6 ㎡/day) — slow mortar-base preparation and high labor intensity. |
章節 6 · 材質真相 Section 6 · Material Authenticity
原廠權威Origin Authority
AUTHENTICITY 天然真石 Authenticity · Real Stone Surface
耐候防線Weathering Defense
安全資料Safety Data
NormSlate / TranSlate / ThinSlate 的材料安全與透光基礎資料。 Material safety and translucency baseline data for NormSlate / TranSlate / ThinSlate.
技術白皮書Technical Whitepaper
給建築師、設計師與業主代表的系統解說與工法邏輯。 System methodology and installation logic for architects, designers, and owner representatives.
透光系統Translucency System
LumiSlate™ 專用的結構、光感邏輯與場景應用依據。 Structural logic, light-transmission behavior, and application references for LumiSlate™ specifications.
檢測矩陣Test Matrix
在提審、比選與內部核可前，進行精準數據交叉核對。 Precision data cross-reference for submittal, competitive review, and internal approval workflows.
章節 7 · 奢華完工藝廊 Section 7 · Completed Project Gallery
戶外建築立面Exterior Facade
歷經海島氣候淬鍊，依然穩固宣告天然真石結晶的誠實威信。 Weathered through demanding coastal climates, still declaring the honest authority of natural stone crystalline surfaces.
精品商業空間Luxury Commercial
突破剛性限制的柔性曲面包覆，在第一眼便緊緊抓牢頂級客群的注意力。 Flexible curved cladding that breaks rigid constraints — commanding premium client attention from the very first glance.
奢華旅宿空間Luxury Hospitality
從奢華大廳到梯廳系統化對位，創造無可比擬的頂奢到訪儀式感。 From grand lobby to systematically aligned lift lobbies — creating an unrivalled arrival ritual for the ultra-luxury guest.
柔性弧形工藝Flexible Curve Craft
真石結晶貼合立體弧面幾何，柔性工法突破傳統石材的平面加工極限。 Natural stone conformed to three-dimensional curved geometry — flexible methodology breaking the flat-plane limits of conventional stone fabrication.
VOLUME & DIVERSITY 系統化礦脈庫 VOLUME & DIVERSITY · SYSTEMATIC MINERAL ARCHIVE
Anova Core™ 不僅重新定義了石材的物理性能，更建構了龐大的物質美學庫。從極致奢石、透光結晶到深邃板岩，我們完整收錄全球經典礦脈的流暢秩序，賦予建築團隊毫無限制的選配與創作自由。 Anova Core™ redefines stone performance while building an expansive library of material aesthetics. From ultra-luxury stones and translucent crystals to deep-toned slates, we document global mineral veins in full — empowering design teams with unrestricted selection and creative freedom.
水泥系列 Cement Series
帶有溫度的柔和水泥石材，適合住宅特色牆、精品旅宿與自然暖意為主的空間。 A warm, soft cement-toned stone — ideal for residential feature walls, boutique hotels, and naturally inviting spaces.
板岩系列 Slate Series
冷調板岩搭配斜向紋理，在受控商空、特色牆與現代建築色盤中顯得更為精密精準。 Cool slate with diagonal grain — reads as sharp and precise within controlled commercial interiors, feature walls, and modern architectural palettes.
暖紋系列 Warm Grain Series
較溫暖、偏向旅宿的表面方向，適合精品吧台、接待牆與品牌住宅空間。 A warmer, hospitality-forward surface direction — suited for boutique bars, reception walls, and branded residential interiors.
UV 系列 UV Series
更深色、受保護的表面路徑，適合高端商業環境中更精準、受控的奢華空間語言。 A deeper, UV-protected surface direction — precise and controlled luxury language for high-end commercial environments.
8
珍稀真石系列Rare Stone Series
100+
自然石紋紋理Natural Mineral Surfaces
3
核心工程系統Core Engineering Systems
∞
創作自由Creative Freedom
章節 8 · 三路徑規格行動 Section 8 · Specification Pathways
建築師 / 設計師 Architects & Designers
線上調閱 100+ 款真石紋理，進行概念選配後申請實體樣板，為立面、旅宿與高端室內設計提案取得第一手材質依據。 Browse 100+ real stone textures online, select your concept finish, and request physical sample boards for facade, hospitality, and luxury interior proposals.
工程方 / 採購端 Engineers & Procurement
下載檢測矩陣、技術白皮書與合規文件，直接進入內部提案與提審流程。 Download test matrices, technical whitepapers, and compliance documents to support internal submittal and approval workflows.
開發商 / PM Developers & PMs
針對 Façade 立面、透光石材與曲面包覆專案，安排規格協作與工法整合。 For facade, translucent stone, and curved cladding projects, schedule a specification consultation and installation methodology review.
結語 Closing
Anova Core™ Stone Systems 的存在，不只是讓真石材更輕、更彎、更亮，而是幫高端專案團隊把石材帶進可建造、可提審、可維護的工程秩序之中。 The Anova Core™ system is now available for sample requests and project submittals worldwide. Whether you are in the concept stage or drafting construction plans, our technical experts are here to support your specification needs.
